Choose your country CANADA (FRANÇAIS) CANADA (ENGLISH) USA Home Site map
You are...
Building
Owner
Electrician
Contractor
Architect
Engineer
OEM

About Us Products Services Quotations Order Warranty Contact Us
OEM
 

Our SCRs and Triacs

 

Step Controllers

  Lighting Control Systems
  Energy Management System
  Thermostats
  Gas Fireplace Timer
  Geothermal
  Download Center
  Contact us
 
You are OEM : Step Controllers
 

 

As an original equipment manufacturer, you need to provide your clients with reliable and high-quality products, at a competitive price. The components used are thus fundamental in achieving this goal. It is often costly to control high kW loads. Cristal Controls’ step controllers enable you to do so by combining the precision of the SCR and the high capacity of the step control.

LINEAR STEP CONTROLLERS

CCE Series
Linear Step Controllers
Up to 32 stages

Technology

On large kW custom heaters, a Cristal Controls’ electronic step power controller offers the full advantages of both the Cristal Controls’ SCR as well as step controller and can bring maximum energy savings.

In this system, normally recommended for precise temperature control on heaters drawing more than 100 Amps, one SCR heating stage, usually 25% larger than other heating stages, is proportionally controlled with Cristal Controls’ SCR.

The other heating stages are controlled by the electronic step controller. The SCR stage automatically fills the gaps between step controlled stages, thus providing fully proportional control over the entire heater kW range.

Advantages

  • This scheme is far more economical than using SCR controllers to carry the entire heater load, but is entirely equivalent in operation
  • Cristal Controls’s step controllers range from 2 to 32 steps

Spécifications

   Linear Step Controllers  
 Download technical data
CCE-4 1 SCR modulating step + 4 ON/OFF Steps
CCE-8 1 SCR modulating step + 8 ON/OFF Steps
Power supply 24 VAC
Output steps 1 Amp Max, 120 VAC Max
Zero SCR Adjustable
Span Input Adjustable (Min. 2 ON/OFF Steps + 1 SCR Step Controller
Input Signal 0-135 Ohms, 0-10 V, 0-5V, 4@20 Ma
Operation Temperature -40F to +160F (-40C to +72C)
Storage Temperature -40F to +160F (-40C to +72C)
Dimensions CCE-4 190 mm x 55 mm x 30 mm
7-1/2" X 2-3/16" X 1-3/16"
Dimensions CCE-8 223 mm x 105 mm x 30 mm
8" x 4-1/8" x 1-3/16"
Also Available Model with FIFO & Duty Cycle
(up to 24 cycles on request)
Modulating Stages Use Triac (SSR) specifications for modulating stage.
For more stages, contact us.
 
Links of interest © Cristal Controls Ltd - All Rights Reserved 1996 -